The 289 engine was a small-block V8 that was used in a variety of Ford vehicles during that period, including the Ford Mustang, the Ford Falcon, and the Ford Fairlane, among others. While the firing order is specific to the Ford 289 engine, it’s important to note that other engines may have different firing orders, even if they are also V8 engines.
The firing order is determined by the design of the engine and the location of the cylinders, so it can vary from engine to engine. Make sure to always use the accurate and authentic firing order to make your engine run smoothly.
Ford 289 Firing Order
- The Firing Order for Ford 289 is 1-5-4-2-6-3-7-8.
Explanation of Ford 289 firing order
The spark plugs always fire in the accurate firing order. The accurate firing order for the Ford 289 engine is 1-5-4-2-6-3-7-8. In this article, you will see how you can check it. You need to follow the below order to operate:
- Cylinder 1 fires first
- Then cylinder 5
- Followed by cylinder 4
- Then cylinder 2
- Next is cylinder 6
- Then cylinder 3
- Followed by cylinder 7
- Finally, cylinder 8 fires last
It’s important to note that the firing order is different for engines with a different number of cylinders, and even for different versions of the same engine. The firing order of the Ford 289, for example, is different from that of the Ford 302 or the Ford 351. The distributor cap on the Ford 289 is typically numbered, with a #1 marking indicating the location of the first cylinder in the firing order. The spark plugs should be connected to the distributor cap terminal according to the firing order.
The firing order applies to
- 289 Hi-Po
- 289 Windsor
- 302 Windsor
- 5.0L HO
|Fastener Type||Torque Spec|
|Main cap bolts||396 -427 ft. - lbs|
|Connecting Rod Bolts Connecting Rod Bolts||60 ft. - lbs|
|Rocker Arms Studs||92 - 110 ft. - lbs|
|Oil Pump Bolts Oil Pump Bolt||35 ft. - lbs|
|Cam Sprocket Bolts||70 ft. - lbs|
|Harmonic Damper Bolt||35 ft. - lbs|
|Harmonic Damper Bolts Front Cover Bolt||58-99 ft. - lbs|
What is the oil capacity for a Ford 289 engine?
the oil capacity for a stock Ford 289 engine is around 5 quarts (4.7 liters) with an oil filter change. The oil capacity depends upon the size of the filter you use. The oil capacity for a Ford 289 engine relies upon the application and the type of oil filter used.
It’s always a good idea to consult the vehicle owner’s manual or service manual for the specific oil capacity and filter requirements for your particular Ford 289 engine. This will ensure that you use the correct amount of oil and the appropriate type of oil filter for optimal engine performance and longevity.
Check out 5.4 Triton Firing Order
What is the distributor rotation for the Ford 289 engine?
The distributor rotation for the Ford 289 engine is counterclockwise. When you see it from the top it rotates clockwise. The most important thing is the direction. In the case of the Ford 289 engine, the firing order is 1-5-4-2-6-3-7-8, which means that the spark plugs fire in that sequence. The distributor rotor rotates counterclockwise, and as it does so, it contacts each of the spark plugs.
What happens if the spark plug wires are connected in the wrong order for a Ford 2 9 engine?
If the spark plug wires are connected in the wrong order for a Ford 289 engine, it can cause the engine to run poorly or not at all. This is because the firing order of the engine is critical for proper combustion and engine performance. If spark plug wires are not connected properly then there are higher chances of misfire.
In some cases, connecting the spark plug wires in the wrong order can also cause damage to the engine, such as overheating or pre-ignition. Because of this more engine issues can occur. Always make sure that spark plugs are properly connected to the wires and are in proper firing order. The correct firing order for the Ford 289 engine is 1-5-4-2-6-3-7-8, and it’s important to follow this order when connecting the spark plug wires.
Firing orders with similar vehicles
- Ford Fairlane
- Ford Mustang
- Ford Falcon
- Ford Comet
- Ford F-Series trucks (F-100, F-250)
- Ford Ranchero
- Shelby GT350